Site Map Home
HomeApplicationsApplicationsResourcesProject ProfilesClientsSustainabilityContact Us

Stayflex® Corrosion Control Systems

Protection for the life of your building!


Why Does it Work So Well?

Applied Thickness – Average installed thickness between 1”-2" or 75 to 300 times thicker than paint.

Strength – Ultimate combination of spray polyurethane foam insulation and “fiberglass” resin coating technology. The final installed product is a structural composite assembly, having similar strength to products such as fiberglass tanks and piping.

Minimal Surface Preparation – High-strength, low-weight system achieves mechanical lock to substrate, unlike traditional coatings that are solely dependent on surface adhesion.

Low Permeability – High-solids, quick-cure system forms a tight cellular matrix that minimizes air, chemical and water vapor from reaching substrate.

Compare Stayflex® Systems to Traditional Systems:

Feature Stayflex® Systems Epoxy Acrylic Polyurea
Typical thickness 1-2" .006" -.013" .10"-.025" .30"-.250"
Requires surface preparation  
Fills metal-to-metal contact points/inaccessible areas      
Low permeability      
25+ year proven, verified performance      
R-value (per inch) 6.5      
Payback thru energy savings      
Controls condensation      
Improves racking, shear & wind uplift resistance      
Reduces thermal shock, building movement      
Earn LEED energy efficiency credits for sustainable construction      

Typical Corrosion Control Applications:

Pre-engineered steel & concrete buildings
All steel and masonry surfaces
Storage tanks & vessels
Ductwork & Piping

 “I have been involved with numerous protective coating systems over the past 20 yrs. and have not found a system that has performed as well in aggressive environments as the Stayflex® System”. - Joe Bressler, Project Engineer    World International Testing, Inc.

Photo Gallery

(click thumbnail to view full size image)